Loctite Spray Adhesive General Performance

Available Sizes: 13.5 oz.

 

Color When Dry: Clear

 

 

Where to Buy

Within:

Loctite® Spray Adhesive General Performance

Safety Precautions

Well-ventilated area, safety glasses.

Preparation

Shake well before using. Apply adhesive between 65°F (18°C) and 95°F (35°C). The can temperature should be at least 60°F (16°C). Surfaces must be clean, dry and free of foreign materials. Protect finished surfaces. Pre-fit all materials. Test substrates for compatibility before starting application.

Application

Turn spray tip so that the black dot is aligned with the nozzle. Hold can in a vertical position and spray from a distance of 8' to 10' (20 to 25 cm). Keep the can moving to create an even coat and avoid build-up on the surface. Start and stop the spray just off the work to prevent runs and sags. For a stronger immediate bond, apply an even coat of adhesive to both surfaces, allow to dry to tack (approximately 1 minute), and then bond materials.

Cleanup

After use, invert spray can and spray for approximately 2 seconds (or until spray is free of adhesive) to clear valve and spray tip. Clean spray tip with turpentine or mineral spirits.

Note: When using solvents for cleanup, use proper precautionary measure.