Loctite Spray Adhesive High Performance

Available Sizes: 13.5 oz.


Color When Dry: Clear



Where to Buy


Loctite® Spray Adhesive High Performance

Middleweight Bonding

Safety Precautions

Apply in a well-ventilated area, wash hands after use.


Apply adhesive between 65°F (18°C) and 95°F (35°C). Shake can well before using. Surfaces must be clean, dry and free of foreign materials. Protect finished surfaces. Pre-fit all materials. Testing of substrates for compatibility is recommended. Turn spray tip so that the black dot is aligned with the nozzle.


Hold can in a vertical position. Point valve towards surface and spray from a distance of 8' to 10' (20 to 25 cm). Keep the can moving to create an even coat and avoid build-up on the surface. Start and stop the spray just off the work to prevent runs and sags.

For repositionable/temporary bonds: Apply a very light even coat to one surface. After 15 seconds, join with light pressure only.

For a permanent bond: Apply a medium coat to one surface. Allow to dry to tack and join.

For stronger permanent bonds: Apply a medium coat to both surfaces. Allow to dry to tack (1 to 10 minutes). Porous surfaces will require more than one coat.


After use, invert spray can and spray for approximately 2 seconds (or until spray is free of adhesive) to clear valve and spray tip. Clean spray tip with turpentine or mineral spirits. Note: When using solvents for cleanup, use proper precautionary measure.