Multi Purpose Spray Adhesive

Available Sizes: 11.0 oz


Color When Dry: Clear



Where to Buy


Loctite® Spray Adhesive Multi Purpose

Repositionable/Dries Permanent

Safety Precautions

Well-ventilated area, safety glasses.


The adhesive and materials should be between 65°F (18°C) and 95°F (35°C). Shake can well before using (approximately 10 – 12 times). Surfaces must be clean, dry and free of foreign materials. Protect finished surfaces. Pre-fit all materials. Test substrates for compatibility before starting application.


Turn spray tip so that the black dot is aligned with the nozzle. Hold can in a vertical position and spray from a distance of 8 to 10 inches (20 to 25 cm). Keep the can moving to create an even coat and avoid build-up on the surface. Start and stop the spray just off the work to prevent runs and sags. Repositionable / temporary bonds: Apply a light even coat to one surface. After a few seconds, join and press together lightly. To remove, gently peel from corner. For a stronger immediate bond, apply an even medium coat of adhesive to both surfaces, allow to dry to tack (approximately 1 minute), and then bond materials. Porous surfaces may be bonded while still wet.


After use, invert spray can and spray for approximately 2 seconds (or until spray is free of adhesive) to clear valve and spray tip. Clean spray tip with turpentine or mineral spirits. Note: When using solvents for cleanup, use proper precautionary measures.