Loctite Spray Adhesive Professional Performance

Available Sizes: 13.5 oz.

 

Color When Dry: Clear

 

 

Where to Buy

Within:

Loctite® Spray Adhesive Professional Performance

Safety Precautions

Well-ventilated area, wash hands after use.

Preparation

Apply adhesive between 65°F (18°C) and 95°F (35°C). Shake can well before using. Surfaces must be clean, dry and free of foreign materials. Protect finished surfaces. Pre-fit all materials. Testing of substrates for compatibility is recommended. Repositioning is not possible. Turn spray tip so that the black dot is aligned with the nozzle.

Application

Hold can in a vertical position. Point valve towards surface and spray from a distance of 8” to 10” (20 to 25 cm). Keep the can moving to create an even coat and avoid build-up on the surface. Start and stop the spray just off the work to prevent runs and sags. Apply an even coat to both surfaces to be bonded and allow to dry 2 to 5 minutes between coats. Apply maximum pressure over entire surface. Adhesive loses tack after approximately 10 minutes. Recoat if time exceeded. Porous surfaces will require more than one coat.

Cleanup

After use, invert spray can and spray for approximately 2 seconds (or until spray is free of adhesive) to clear valve and spray tip. Clean spray tip with turpentine or mineral spirits.

Note: When using solvents for cleanup, use proper precautionary measure.