Available Sizes: 2.0 fl. oz.
Color When Dry: Clear
Where to Buy
Loctite® Stik’n Seal® Indoor Adhesive
Safety Precautions
Gloves for prolonged contact.
Preparation
Protect work area. Surfaces to be glued or sealed must be clean and dry. Pre-fit all materials before applying adhesive. Pierce tube seal with the reverse side of the cap.
Application
As an Adhesive: Apply to both surfaces. Wait for 5 minutes then press surfaces together. Sets in about 10 minutes. Fully cured in 24 hours.
As a Sealant: Apply a layer 6 mm (1/4”) thick over the area to be sealed. Let dry for 24 hours. If necessary, apply a second coat.
Cleanup
Clean tools and adhesive residue immediately with water. Cured sealant may be carefully cut away with a sharp-edged tool.