Loctite Stik'n Seal Outdoor Adhesive

Available Sizes: 1 fl. oz., 2 fl. oz.

 

Color When Dry: Clear

 

 

Where to Buy

Within:

Loctite® Stik'n Seal® Outdoor Adhesive

Water Resistant / Crystal Clear

Safety Precautions

Wear gloves. Wash hands after use. For interior applications, use in a well ventilated area.

Preparation

Protect work area. Surfaces to be sealed or bonded must be clean and free from grease. For improved adhesion, roughen very smooth surfaces. Pre-fit all materials before applying product. Pierce tube with the point on the reverse end of cap.

Application

Tools Typically Required:
Tooling device.

As an adhesive:
Apply adhesive to both surfaces to be bonded. Wait for 5 minutes until adhesive is tacky and then press surfaces together. Clamp if necessary. Sets in approximately 10 minutes and dries in 24 hours. Dry time is dependent upon temperature, humidity and amount of adhesive used.

As a sealant:
Apply a layer 1/4' (6 mm) thick bead over the area to be sealed. Tool if desired. Let dry for 24 hours. If necessary apply a second coat.

Cleanup

Clean tools and uncured product residue immediately with mineral spirits or acetone. Cured product may be carefully cut away with a sharp-edged tool.