Plumber and Marine Clear Adhesive

Available Sizes: 2.7 fl. oz.


Color When Dry: Clear



Where to Buy


Loctite® Plumber and Marine Clear Adhesive

Safety Precautions

Gloves. Use in a well ventilated area.


Protect work area. Surfaces to be glued or sealed must be clean and dry. Pre-fit all materials before applying adhesive. Pierce tube seal with the reverse side of the cap.


As an Adhesive:
Apply to both surfaces. Wait for 5 minutes then press surfaces together. Clamp if necessary. Fully cured in 24 hours. Cure time is dependent on temperature, humidity and thickness of product used.

As a Sealant:
Apply a layer 6 mm (1/4') thick over the area to be sealed. Let dry for 24 hours. If necessary, apply a second coat.


Clean tools and adhesive residue immediately with acetone. Cured sealant may be carefully cut away with a sharp-edged tool.