Loctite Epoxy Instant Mix 5 Minute

Available Sizes: 0.47 fl. oz.


Color When Dry: Translucent yellow



Where to Buy


Loctite® Epoxy Instant Mix™ 5 Minute

Safety Precautions

Well-ventilated area, gloves.


Protect work area. Surfaces must be clean, dry and free from oil, wax and paint. For better adhesion, roughen smooth surfaces prior to cleaning. Pre-fit parts to be joined. Remove plastic cap from center of plunger. Turn nozzle end up and pull plunger back slightly allowing air bubbles to rise to top. Snap off and discard end of syringe. Dispense air. Insert nozzle opening and push past prongs. Rotate nozzle 90° to lock into place.


Depress plunger to dispense equal amounts of hardener and resin directly onto surface to be filled or bonded. Remove and discard nozzle. Wipe syringe tip immediately. Retract plunger slightly and close with the cap provided. Place objects together within 4 minutes of adhesive application. Bond sets in 5 to 7 minutes at 68°F (20°C) to 77°F (25°C). For best results in butt joints, apply adhesive as a reinforcing fillet or splint over the joint for additional support. Remove any excess adhesive immediately with mineral spirits. Usable strength is obtained within 1 hour. Warmer temperatures will shorten the set time and cooler temperatures will lengthen it.


Clean excess glue immediately with mineral spirits. Cured adhesive may be cut away with caution using a sharp blade. Prolonged immersion in paint stripper will soften the cured adhesive to aid removal.