Loctite Epoxy Heavy Duty

Available Sizes: 2 x 4 fl. oz. = 8 fl. oz.


Color When Dry: Clear to amber



Where to Buy


Loctite® Epoxy Heavy Duty

Safety Precautions

Well-ventilated area, gloves.


Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion. Pre-fit parts to be joined. Dispense equal amounts of resin and hardener on a disposable surface. Recap bottles at once ensuring that the correct cap goes back on the correct bottle. Interchanging caps will make future cap removal impossible. Mix resin and hardener for one minute thoroughly.


For best results apply a small amount to both surfaces within one to two minutes of mixing adhesive and press together. Placing parts together close to the 5 minute set time will reduce adhesion. Remove any excess glue immediately with acetone. Support bond for 10 minutes at room temperature. Usable strength achieved in 8 hours. Fully cured in 24 hours.


Clean excess glue immediately with acetone. Cured adhesive may be cut away with caution using a sharp blade. Prolonged immersion in paint stripper will soften the cured adhesive to aid removal.