Repair Putty

Available Sizes: 2 oz (56 g)

 

Color When Dry: Bluish white

 

 

Where to Buy

Within:

Loctite® Repair Putty All‐Purpose

Knead, Apply, Ready

Safety Precautions

Wear gloves and wash hands after use.

Preparation

Surfaces should be clean, dry and free from grease, dust and oil. For better adhesion, slightly roughen the surface with a wire brush or sandpaper prior to cleaning. Cut off desired amount of Repair Putty and knead until uniform color is obtained (approximately 1 minute).

Application

Apply the putty to surface to be repaired within 3 minutes of mixing. Work putty firmly into the crack or hole and shape/smooth with hands. For bonding, place the putty between the surfaces and apply firm pressure to ensure intimate contact with both surfaces. If applying to a wet surface, apply forcefully and hold in place for 3-5 minutes until adhesion takes effect. For a smooth finish, rub the putty with a damp cloth prior to hardening. Working time is approximately 3-5 minutes. After 15-60 minutes, the putty can be sanded, drilled or painted. For best results: Use damp fingers for easier mixing, application and to achieve a smooth appearance of the cured putty. Remove excess material before hardening begins.

Cleanup

Cured and uncured putty may be cut away with caution using a sharp blade.