Available Sizes: 57g
Color When Dry: Dark metallic gray
Where to Buy
Loctite® Metal Filled Epoxy Putty
Bonds & Rebuilds with Metal-Like Workability
Safety Precautions
Wear gloves and wash hands after use.
Preparation
Surfaces should be clean and free from grease and oil. Slightly roughen the surface with a wire brush or sandpaper. Cut off desired length of Loctite Automotive Epoxy Putty and knead until uniform color is obtained. Putty turns a dark metallic gray when completely mixed.
Application
Apply the putty within 2 minutes of mixing, working it firmly into the crack or hole. For bonding, place the putty between the surfaces and apply firm pressure to ensure intimate contact with both surfaces. For a smooth finish, rub the putty with a damp cloth prior to hardening. Working time is approximately 3 minutes. After 5 to 10 minutes the putty will harden and form a tenacious bond. After 60 minutes, the putty can be sanded, drilled or painted.
Cleanup
Cured putty may be cut away with caution using a sharp blade.