Available Sizes: 9 fl. oz.
Color When Dry: White
Where to Buy
LOCTITE® Power Grab® Express Molding & Paneling
Interior Construction Adhesive
Wash hands after use.
The temperature of the product, the surfaces and the working area must be above 50°F (10°C). For best performance, apply adhesive at 70°F (21°C). Ensure surfaces to be bonded are clean, dry, structurally sound and free of dust, grease, oil, and other foreign contaminants. Sand glossy surfaces. Pre-cut and fit materials before applying adhesive. Cut tip of cartridge.
Using a caulking gun, apply adhesive around perimeter of large items approximately 2'' from the edge, apply additional beads at 6'' intervals. Finishing nails may be required every 16'' to prevent warping. Join substrates within 15 minutes and press firmly. Repositionable for 15 minutes. Achieves final strength in 12 hours and full cure in up to 14 days. Temperature, humidity, substrate porosity and amount of adhesive used will affect cure times.
Clean tools and uncured adhesive residue immediately with warm water and soap. Cured adhesive may be carefully cut away with a sharp-edged tool.