Power Grab Ultimate Construction Adhesive

Available Sizes: 9 fl oz


Color When Dry: White



Where to Buy



Loctite® Power Grab® Ultimate Construction Adhesive

All Conditions, All Weather, All Materials

Safety Precautions

Wash hands after use.


The temperature of the product must be between 40°F and 140°F (4°C and 60°C) while the surfaces and the working area must be between 0°F and 100°F (-18°C and 38°C). For best performance, apply adhesive at room temperature. Ensure surfaces to be bonded are clean, dry, structurally sound and free of frost, dust, grease, oil, and other foreign contaminants. Pre-cut and fit materials before applying adhesive. Remove nozzle, cut nub and puncture inner seal. Screw on nozzle and cut to desired bead size.


Using a caulking gun, apply adhesive to one the surfaces to be bonded. Join substrates within 10 minutes and press firmly. Adhesive cures within 24 hours.


Clean tools and uncured adhesive residue immediately with mineral spirits. Cured adhesive may be carefully cut away with a sharp-edged tool.