Loctite PL S20 Polyurethane Self-Leveling Concrete Crack Sealant

Available Sizes: 10 fl. oz., 28 fl. oz.

 

Color When Dry: Limestone Gray

 

 

Where to Buy

Within:

Loctite® PL® S20 Polyurethane Self-Leveling Concrete Crack Sealant

Loctite® PL® S20 Polyurethane Self-Leveling Concrete Crack Sealant is a professional grade sealant for concrete. It is a one component, polyurethane, self-leveling sealant for contraction / expansion joints and cracks in concrete floors and decks. It cures in place to form a highly resilient and abrasion resistant seal, which resists deterioration caused by weather, stress, movement, traffic and water. Its abrasion and tear resistance makes it ideally suited for applications exposed to pedestrian and vehicular traffic.

Other Recommended Product Solutions

Recommended For

  • Repairing Sidewalks
  • Repairing Concrete Floors and Decks
  • Repairing Garage Floors
  • Repairing Driveways

Not Recommended For

  • Applications requiring temperature resistance greater than 180°F (82°C)
  • Use in areas of high chlorine concentration such as around swimming pools
  • Contact with oil-based caulking compounds, butyl caulking compounds and silicone sealants(Uncured and cured)
  • Joint depths greater than 3/8' (9.5 mm) without the use of a backer rod. In joints deeper than 3/8' (9.5 mm) the sealant may bubble if applied too deep or if substrate is not absolutely dry
  • Aircraft runway or tarmac use
  • Vertical surface repair (use on horizontal surfaces only)
  • Exterior applications when rain is expected before sealant reaches initial cure
  • Use with fillers impregnated with oil, asphalt, tar or any other migratory saturant
  • Underwater applications or permanent water immersion