Acrylic Caulk with Silicone

Available Sizes: 5 fl. oz., 10 fl. oz.


Color When Dry: Clear, White, Gray, Almond, Cedar, Dark Brown, Bronze



Where to Buy


Loctite® Acrylic Caulk with Silicone

Safety Precautions

Wear gloves.


The temperature of the product, the surfaces and the working area must be above 40°F (5°C). For best performance, apply sealant at 70°F (21°C). Ensure surfaces to be sealed are clean, dry, structurally sound and free of dust, grease, oil, and other foreign contaminants. Cut off tip of cartridge at a 45° angle to desired bead size (3/8' recommended). Puncture inside seal of cartridge.


Using a caulking gun, apply steady trigger pressure forcing the sealant onto the surface and into the joint. Maximum joint size should not exceed 5/8' (15.9 mm) x ½' (12.7 mm). A width to depth ratio of 2:1 should be maintained. Smooth bead with a wet finger or tool. Allow to dry 30 minutes before painting with latex paint or 24 hours if using oil-based paints. Allow a minimum of 24 hours before exposing to water.
Note: Clear sealant will extrude white and will turn clear as it dries.


Clean tools and uncured adhesive residue immediately with warm water and soap. Cured adhesive may be carefully cut away with a sharp-edged tool.