Painter's Caulk

Available Sizes: 10 fl. oz.

 

Color When Dry: White

 

 

Where to Buy

Within:

Loctite® Painter's Caulk

Safety Precautions

Apply and cure in a well ventilated area. Wear gloves and wash hands after use.

Preparation

Apply sealant between 40°F (5°C) and 100°F (38°C). Surfaces must be clean, dry and free of old caulk, grease, dust and other contaminants. For neat bead lines, mask both sides of the joint. Cut the tip off the cartridge or squeeze tube at a 45° angle to desired bead size (minimum of 1/8').

Application

Apply sealant with steady pressure, forcing the sealant into the joint. Smooth bead immediately with a wet finger or a tool. Remove masking tape immediately after tooling and wipe excess off of hands and tools. Sealant is paintable within 1 hour depending on temperature and humidity. Allow 24 hours before exposing to water.

Cleanup

Clean tools and sealant residue immediately with warm water and soap. Cured sealant may be carefully cut away with a sharp-edged tool.