Available Sizes: 8 fl. oz., 16 fl. oz.
Color When Dry: NA
Where to Buy
Loctite® Naval Jelly Rust Dissolver
Rust Treatment
Safety Precautions
Well-ventilated area, rubber or plastic gloves, safety glasses.
Preparation
Remove loose rust & dirt.
Application
Apply between 50°F (10°C) & 90°F (32°C). Brush Naval Jelly on liberally, working the rust treatment into pitted areas. Leave on 5 to 10 minutes. Caution: Wipe off painted surfaces immediately, Naval Jelly will remove paint. The rust treatment should not remain on a surface for more than 15 minutes. Rinse Naval Jelly rust treatment off with fresh water. Repeat if any rust remains. Leave rust treatment on longer for heavily rusted areas. Protect with Naval Jelly Rust Preventer or prime & paint within 24 hours (Naval Jelly does not provide long term protection to stop rust from rust reoccurring).
Cleanup
Water.