Available Sizes: 5g
Color When Dry: Clear
Where to Buy
Loctite® Super Glue Brush On
Apply in a well-ventilated area. Wear gloves.
Surfaces must be clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
Twist off cap by turning counter-clockwise. Using the built-in brush, apply the adhesive lightly and uniformly to one surface only. Excess glue increases bonding time and decreases strength. Press surfaces together immediately. Hold in place for 15 to 30 seconds until bond sets. Do not reposition parts. Replace cap and clean excess adhesive with tissue paper.
Cured adhesive may be cut away with caution using a sharp blade, removed with Duro® Super Glue Remover, acetone or with boiling water.