Loctite Super Glue Gel

Available Sizes: 1pk 2g,, 2pk 2g

 

Color When Dry: Clear

 

 

Where to Buy

Within:

Loctite® Super Glue Gel

Safety Precautions

Apply in a well ventilated area. Wear gloves.

Preparation

Surfaces must be close fitting with no gaps, clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.

Application

In a clock-wise direction, screw the cap and nozzle assembly down all the way to the tube shoulder, puncturing the tube. Remove the cap counter clockwise from the nozzle. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 60 seconds until bond sets. Do not reposition parts. Clean tip with tissue and replace the cap.

Cleanup

Use Duro® Super Glue Remover to clean up uncured adhesive residue. Cured adhesive may be cut away with caution using a sharp blade, removed with acetone or with boiling water.