Available Sizes: 2g
Color When Dry: Clear
Where to Buy
Loctite® Glass Glue
Dishwasher Safe & Crystal Clear
Well-ventilated area, gloves.
Surfaces must be clean, dry and free from oil, wax and paint. Wash all glassware with water and dry. Avoid using detergents to clean glassware as detergent residues can affect the quality of the bond. Protect work area. Pre-fit parts to be joined. All parts to be bonded must be close fitting with no gaps or voids. Screw the cap and nozzle down clockwise all the way to tube shoulder, puncturing the tube. Remove the cap counter clockwise from the nozzle.
Apply Loctite Instant Glass Glue sparingly to one material to be bonded. Use approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 5 to 60 seconds until bond sets. Do not reposition parts. Leave parts undisturbed for at least 1 hour or for best results leave overnight for full bond strength to develop. Wait 1 week before washing item in dishwasher. Clean nozzle tip with tissue and replace the cap.
Cured adhesive may be cut away with caution using a sharp blade, removed with Duro Super Glue Remover, mineral spirits or with boiling water.