Available Sizes: 10g
Color When Dry: Clear
Where to Buy
Loctite® Super Glue Gel Professional
No Drip, High Strength
Safety Precautions
Apply in a well ventilated area. Wear gloves.
Preparation
Surfaces must be close fitting with no gaps, clean, dry and free from oil, wax and paint. Protect work area. Lightly roughen smooth surfaces for better adhesion. Pre-fit parts to be joined.
Application
In a clock-wise direction, screw the cap and nozzle assembly down all the way to the tube shoulder, puncturing the tube. Remove the cap counter clockwise from the nozzle. Apply sparingly to one side only using approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 15 to 60 seconds until bond sets. Do not reposition parts. Clean tip with tissue and replace the cap.
Cleanup
Use Duro® Super Glue Remover to clean up uncured adhesive residue. Cured adhesive may be cut away with caution using a sharp blade, removed with acetone or with boiling water.