Super Glue ULTRA Gel Control

Available Sizes: 4g

 

Color When Dry: Clear

 

 

Where to Buy

Within:

Loctite® Super Glue ULTRA Gel Control™

Our Most Durable, Impact Resistant Super Glue

Safety Precautions

Wear gloves. Protect work area.

Preparation

Surfaces to be bonded must be close fitting, clean, dry and free from oil, wax and paint. For best results, lightly roughen smooth surfaces. Pre-fit parts to be joined.

Application

To puncture the nozzle, screw the cap clockwise continuously into the base until the clicking sound stops. Unscrew the cap counter clockwise to open the bottle. Squeeze the blue side grips to dispense the adhesive. Only one drop of adhesive per square inch of surface is required. Press surfaces together immediately and hold for 60 seconds. Do not attempt to reposition the parts. Immediately after use, clean tip with tissue and replace cap. For increased strength, leave the parts undisturbed for at least 10 minutes. Full cure in 24 hours. Note: Cure time is dependent upon temperature, humidity, porosity of surfaces and amount of adhesive applied.

Cleanup

Cured adhesive may be cut away with caution using a sharp blade, removed with mineral spirits or with boiling water.