Available Sizes: 0.20 fl. oz.
Color When Dry: Green
Where to Buy
Loctite® Threadlocker Green 290™
Nut and Bolt Locker
Safety Precautions
Keep out of reach of children.
Preparation
Protect work area. Parts to be sealed must be clean and dry. Shake the product thoroughly before use. Note: To prevent the product from clogging in the nozzle, avoid touching the bottle tip to the metal surface.
Application
For Pre-Assembled Threaded Parts with Thru Holes: 1) Prior to assembly, clean all threads (bolt and hole) with a cleaning solvent and allow to dry. 2) For Thru-Holes: Apply several drops of the product at screw and body juncture. For Porosity Sealing: 1) Clean area and apply localized heat to the area to approximately 250°F (121°C). 2) Allow to cool to approximately 185°F (85°C) and apply the product. Sets in about 10 minutes. Fully cured in 24 hours.
Cleanup
Clean adhesive residue immediately with a damp cloth. Cured product can be removed with a combination of soaking in methylene chloride and mechanical abrasion such as a wire brush. For disassembly, shear with standard hand tools and remove with methylene chloride. In rare instances where hand tools do not work because of excessive engagement length, apply localized heat to nut or bolt to approximately 482°F (250°C). Disassemble while hot.