Skip to Content
4 min read
How to: Wainscoting made easy!

How to install wainscoting like a professional

Artificial Content Title -- to be hidden

Learning how to install wainscoting is simple. Our guide takes you through the process and the materials you need. Add a bit of timeless beauty to any room of your house!

How to do wainscoting: The rules on color and height

Wainscoting was invented in the early days before homes had insulation. It originally served as a way to keep moisture out of the walls. In today’s houses, wainscoting is purely decorative. But while it doesn’t serve a practical purpose, it’s still a beautiful upgrade to any room.

Traditionally, wainscoting is white, but it comes in a variety of colors and materials. The most important thing, when choosing a color, is to make sure it matches the trim in the room.

Historically wainscoting should not extend over 1/3 of the room height, stopping at the chair rail. In recent years, designers started bending the rules and installing wainscoting panels that extend the length of the wall. When choosing your favorite style of wainscoting, keep in mind that light colors and shorter wainscoting make a room look bigger. Darker colors and longer wainscoting, on the other hand, will make a standard sized room appear smaller.

How to install wainscoting: Step-by step

After you’ve decided on the style of wainscoting, measured your space, and purchased materials, you’re ready to begin. Here’s how to do wainscoting:

  1. Measure and mark the walls where you want to install the wainscoting. Consider door frames, baseboards, chair rails, and electrical outlets as you map out the plan.
  2. Cut the wainscoting, and pre-fit parts to make sure everything lines up correctly.
  3. Clean and dry all surfaces before applying adhesive.
  4. Apply adhesive in vertically beads on the perimeter of the panel. Do not apply all around the panel, always stay with the vertical adhesive beads. The beads should be approximately 2’’ from the edge, and vertically every 6’’.
  5. Flip the board over and fix along the pre-marked lines.
  6. Repeat the process until all are in place.
  7. Attach baseboards and chair rails to the top and bottom of the wainscoting.

How to install wainscoting panels with the right glue

Wainscoting can be done with a variety of materials like tile, wood, plastics, particle board, and more. For an adhesive that fits a multitude of surfaces, reach for Loctite PL 505 Paneling and Trim Adhesive. Because it’s a water-based adhesive, one of the surfaces needs to be porous, e.g. wood or drywall panels. Its gap filling properties make it a good match for uneven walls and you can also use it to install wainscoting over drywall. It has a 25-minute repositioning time allowing for precise alignment when building your wainscoting.

Expert Tip

Share your own projects

You might also be interested in

  • How to find the best bathroom caulk
  • Installing wall trim or crown molding

    Installing wall trim and crown molding, using Loctite® Power Grab® Molding & Paneling. 

  • How to caulk your roof with the best roof sealants
  • Tips on the best epoxy for plastic
  • Show off your skills with backpack crafts for school
  • Attaching a towel bar

    Guide for the fixture of a non-mechanical mount that requires an adhesive. 

  • Good to know: The best silicone caulk and sealants
  • Installing a tile backsplash

    Install a tile backsplash with Loctite® Power Grab® All Purpose. 

  • Tightening a lockset

    Loctite® Threadlocker 242™ Blue prevents accidental loosening due to use and vibration. 

  • Sealing gutters and downspouts

    Loctite® Clear Silicone Sealant for sealing and joining lap seams in gutters and downspouts. 

  • Resetting masonry anchors in a loose porch railing

    Reset anchor bolts and fill gaps between metal and concrete with Loctite® Metal and Concrete Epoxy. 

  • Capping an interlocking block retaining wall

    Building and edging small garden walls using Loctite® PL® Landscape Block adhesive.