Loctite PL Premium Max, Gray, 9 oz
Packaging Size Make your selection 9 oz
Color Make your selection Gray
-
Strong, Versatile Adhesive: PL Premium MAX is strongest, most durable construction adhesive that remains 100% solid after curing for a wide variety of rojects for consistently successful results
-
Solid Durability: Doesn’t develop air pockets for better flexibility and a heavy-duty bond that professionals can trust
-
Unrivaled Bonding: Works reliably on wood, laminate, drywall, concrete, brick, masonry, stone, marble, metal, stainless steel, fiberglass, granite, ceramic, and more
-
Interior and Exterior: Great for framing, flooring, stairs, railings, and most landscaping and deck projects with no strong solvent odor and a 20-minute repositioning time
-
All Weather: Waterproof and can be applied directly to wet and frozen surfaces in both cold (down to 10° F) and hot (120° F) temperatures
Loctite PL Premium Max is our strongest, most durable construction adhesive that remains 100% solid after curing thanks to the unique high solid content adhesive technology. Ideal for most interior or exterior projects where long-term strength and durability are a must, Loctite PL Premium Max works reliably on wood, laminate, drywall, concrete, brick, masonry, stone, marble, metal, stainless steel, fiberglass, granite, ceramic, and other substrates. This high-strength construction adhesive is waterproof and can be applied to wet and frozen surfaces both cold (down to 10° F) and hot (120° F) temperatures for landscaping and deck projects. Durable and long lasting, Loctite PL Premium Max won’t develop air pockets after cure for better flexibility and strength. Loctite PL Premium Max fully cures in 24 hours and is fast grab for no run-on with a 20-minute repositioning time. Loctite PL Premium Max is low in VOC, CARB Compliant (4% by weight), and meets and exceeds APA AFG-01 and ASTM D3498 specs.
Step 1. Cut tip at 45° degree angle to required width opening.
Step 2. Puncture inner seal fully so that it is completely open.
Step 1.Use a caulk gun to apply to one of the surfaces being bonded.
Step 2. Press surfaces together within 10 minutes after application.
Clean tools and adhesive residue immediately with mineral spirits.
Material can only be removed mechanically once cured.