Skip to Content
5 min read
Get crafty

Papier-mâché ideas: Unleash your creativity

Artificial Content Title -- to be hidden

If you’ve always wanted to try crafting with papier-mâché but never actually learnt the basics, this how-to guide on papier-mâché ideas is exactly what you need to get started.

      Papier-mâché: What is it?

      Papier-mâché, sometimes spelled paper mache, is one of those DIY craft techniques many of us have heard about, but never actually tried. The pulped paper itself – simply strips of paper bonded together by a glue paste – is very easy to make, and once you’ve mastered the basics, the sky really is the limit when it comes to papier-mâché ideas. 

      Papier-mâché ideas: The basics

      Before you can let your papier-mâché ideas run wild, you need to learn its two basic fundamentals. Fear not, as these are simple to get to grips with.

          • Paper. The first ingredient you’ll need to make papier-mâché is paper. Old newspaper is always the best choice, as it is cheap, porous, flexible and fairly strong.
          • Tear. Once you have your newspaper, tear it into strips, rather than cutting it. Tearing creates a softer edge that enable each strip to blend better into one another when layered on top of each other. Cut strips create a sharp line.
                                • Paste. The second ingredient is glue paste. Simple pour some white glue or wood glue into a larger mixing bowl and add water to make it into a more liquid paste that will soak into your newspaper strips. A 2:1 glue to water ratio is ideal.

                                Papier-mâché ideas with balloons

                                Now you know how to create your glue paste and paper strips, you’re ready to learn how to create papier-mâché using a balloon as a mold. This can then be used as a basis for papier-mâché ideas for animals, papier-mâché ideas for Halloween, papier-mâché ideas for Christmas and many more.

                                1. Prepare. Tear your newspaper strips, mix your glue paste and inflate a balloon.
                                2. Soak. Pour your glue paste into a smaller tray or shallow container. Dip a newspaper strip into the paste and let it soak.
                                3. Glue. Place the balloon on top of a large bowl or small bucket to prevent it from rolling. Shake any excess paste off the strip and glue it to the side of the balloon. Use your fingers or a paint brush to smooth out the edges of the strip.
                                4. Repeat. Glue more strips to the balloon, allowing them to overlap as you proceed. When you’ve covered its entire surface, smooth out any wrinkles with your fingers or a paintbrush.
                                5. Layer. Make a second and third layer, each covering the entire surface of the balloon.
                                6. Dry. Leave your papier-mâché to dry, either in the bowl or bucket and turning every few hours, or using the knotted end of the balloon to clip it to a clothesline indoors.
                                7. Pop. It will take around two to three days for the papier-mâché to completely dry. When it is, take hold of the knotted end of the balloon, use a pin or sharpened pencil to pop it and remove.

                                Using paint and other accessories, you can now turn your papier-mâché balloon into anything from a hot air balloon or Halloween pumpkin to an Easter bunny or egg. Alternatively, you can place the strips on a sort of skeleton made of wire mesh and create casts for any object you can think of.

                                Expert Tip

                                Share your own projects

                                You might also be interested in

                                • How to find the best bathroom caulk
                                • Installing wall trim or crown molding

                                  Installing wall trim and crown molding, using Loctite® Power Grab® Molding & Paneling. 

                                • How to caulk your roof with the best roof sealants
                                • Tips on the best epoxy for plastic
                                • Show off your skills with backpack crafts for school
                                • Attaching a towel bar

                                  Guide for the fixture of a non-mechanical mount that requires an adhesive. 

                                • Good to know: The best silicone caulk and sealants
                                • Installing a tile backsplash

                                  Install a tile backsplash with Loctite® Power Grab® All Purpose. 

                                • Tightening a lockset

                                  Loctite® Threadlocker 242™ Blue prevents accidental loosening due to use and vibration. 

                                • Sealing gutters and downspouts

                                  Loctite® Clear Silicone Sealant for sealing and joining lap seams in gutters and downspouts. 

                                • Resetting masonry anchors in a loose porch railing

                                  Reset anchor bolts and fill gaps between metal and concrete with Loctite® Metal and Concrete Epoxy. 

                                • Capping an interlocking block retaining wall

                                  Building and edging small garden walls using Loctite® PL® Landscape Block adhesive.